PeelSeal Self-Adhesive Polymer Modified Bitumen Membrane
Product Overview
PeelSeal is a premium self-adhesive polymer modified bitumen membrane engineered for cold application without torches or adhesives. Simply peel and stick – the specially formulated SBS/APP modified bitumen layer bonds instantly to prepared surfaces, creating a permanent waterproof seal. Ideal for sites where open flames are prohibited (basements, tunnels, renovation) and for fast, clean installation [citation:2][citation:5].
Torch‑Free Safety
Perfect for gas stations, wooden structures, and confined spaces – no flame, no hot kettles, no fumes [citation:2].
Self‑Healing Technology
Micro cracks and minor punctures are automatically sealed by the flowable bitumen compound – extends service life [citation:1][citation:4].
High Bond Strength
PeelSeal achieves ≥1.5 N/mm adhesion to concrete and metal, preventing water migration and edge lifting [citation:1][citation:4].
Wide Temperature Range
Remains flexible down to -20°C and stable up to 70°C – suitable for all climate zones [citation:4][citation:5].
Key Applications
| Below‑Grade / Foundations Basement walls, slabs, and retaining structures – withstands hydrostatic pressure [citation:2][citation:3]. | |
| Cut‑and‑Cover Tunnels & Subways Approved for underground rail and pedestrian passages where no flame is allowed [citation:2][citation:4]. | |
| Pools & Water Tanks Potable water contact grades available – fish‑safe and non‑toxic after curing [citation:5]. | |
| Low‑Slope Roofing (Non‑Exposed) Ideal under ballast, insulation, or green roof systems [citation:1]. | |
| No‑Flame Renovation Schools, hospitals, and high‑rise buildings – retrofit without disrupting occupants. |
Technical Specifications
| Property | Test Method | 1.5 mm | 2.0 mm | 3.0 mm |
|---|---|---|---|---|
| Tensile Strength (N/50mm) | GB 23441 | ≥450 | ≥450 | ≥450 [citation:1][citation:4] |
| Elongation at Break (%) | GB 23441 | ≥30 | ≥30 | ≥30 [citation:1] |
| Low Temperature Flexibility | GB 23441 | -20°C (no cracks) [citation:1][citation:4] | ||
| Heat Resistance (2h) | GB 23441 | 70°C (no flow) [citation:1] | ||
| Peel Strength (concrete) N/mm | GB 23441 | ≥1.5 [citation:1] | ||
| Peel Strength (self-adhesive lap) N/mm | GB 23441 | ≥1.0 [citation:1] | ||
| Self-Adhesive Re‑peel Strength N/mm | GB 23441 | ≥1.5 [citation:1] | ||
| Water Impermeability | GB 23441 | 0.3 MPa, 30 min (no leak) [citation:4] | ||
| Thickness Tolerance | GB 23441 | ±0.1 mm | ||
Complies with GB 23441‑2009 (N class) [citation:1][citation:2].
Project References
Why Choose PeelSeal?
Fast Installation
Up to 40% faster than torch-applied – no cooling time, no waiting for adhesive to set.
Safe & Clean
Zero VOC, zero flame, zero hot asphalt fumes – environmentally friendly [citation:5].
Self‑Sealing Around Fasteners
When mechanically fastened, the bitumen flows around nails/screws – no extra sealants needed.